Ads Top

Bad Impact of Using Mineral Water on Car Radiators

Bad Impact of Using Mineral Water on Car Radiators
source: pxhere.com

In general, car maintenance can be said to be easy and difficult. Why is that? For those of you who already understand and want to learn about the engine and car care, then you say it's easy to take care of old cars to the latest cars. But vice versa with someone who does not understand the engine and car maintenance. So it is quite difficult to maintain engine performance and keep the car radiator in a state of "good condition".

Well, its function is to maintain the radiator so that it can maintain the temperature of the engine temperature of the car so that it remains optimal in accordance with its normal standards. Therefore, it is recommended to fill the radiator using a water coolant. Where the liquid contains propylene concentrate. However, there are some car users who still fill it with mineral water. So, is it actually permissible or not to fill the radiator with mineral water? Or is it required to fill it with coolant water?

It is better to keep using coolant liquid only when filling it into the reservoir tube. Because the liquid has a higher boiling level than mineral water. And you are also encouraged to buy the liter or bottled one to be accommodated in the car if at any time needed or the supply of coolant liquid in the radiator is reduced, then you can fill it without having to bother to buy into the store.

Also Read :
  1. Best Car Insurance Company 2019
  2. Status of Car Insurance Policy Still Active, But Why Claims Can Be Denied?
  3. Tricks for Prospective Customers to Buy Car Insurance

If the condition is urgent, or the supply of radiator coolant is used up, you can also fill it with mineral water. However, the volume or percentage of mineral water must be less than the coolant water. After you get the coolant liquid, then immediately replace the contents of the full radiator with the coolant liquid.

The use of mineral water for radiators also has some impact that can occur on your favorite car. Because basically, the radiator will only work optimally when it is filled with a coolant liquid. What are the adverse effects? Here's the full review of the adverse effects of using mineral water on car radiators.

Mineral Water Has Evaporating Properties
Mineral water has volatile properties or is easily hot at high temperatures or after the engine has been switched on for a while. In addition to damaging the engine, filling the radiator using mineral water will have an impact on car air conditioner damage, the weakness of mineral water, if loaded into the car radiator, will have corrosive properties. This means that it can make erosion and rust on the inside of the radiator and radiator pipe. If there has been rust, the car is also more susceptible to overheating.

Rust deposits
Filling radiator water with mineral water can be ensured there will be rust deposits that enter the radiator cooling system, including the hose and thermostat. The thicker the crust, it will cause other negative effects. Starting from the inhibition of water flow to the blocking of the occurrence of exchange of calories between the engine and coolant which makes the temperature will heat up quickly as a result of the ineffectiveness of the cooling system.

Corrosion Effects
The effects of rust and corrosion in the radiator will cause the car to pull up, as a result of using mineral water for radiator fluid. Indeed the impact does not feel direct, it will only be felt in a fairly long period of time. If it has infected your car's radiator, then the cost that you will spend is quite large, certainly not worth the cost that you spend when replacing coolants on a regular basis.

Interferes with the cooling system
The Bad Impact of the Use of Mineral Water on Car Radiators is that filling the radiator water seems to be the simplest problem. However, if you choose the type of water or radiator filler fluid, it can disrupt the car's cooling system, which can have a fatal impact on your car's engine. If you ask the workshop, what kind of liquid is good for radiators other than coolant liquid, there must be a lot of answers "mineral water", "water coolant", or "AC waste water".

For Radiator Damage
A good radiator water is distilled water, better known as distilled aqua that can be purchased at a chemical shop. There are also people who diligently collect water from filtered AC exhaust droplets for resale. In this case, the quality is the same, because the water that comes from the drops from the AC is condensed water to prevent the cause of the car engine from mopping up often.

However, it was suggested to the car owner not to try to fill the radiator using mineral water. when the engine works at a high temperature of 80-90 degrees Celsius and the pressure is high enough, the content in mineral water will result in deposits in the walls of the cooling system. In addition, the substances contained in it will disrupt the system (water pump, thermostat, and most likely can clog the radiator).

So if you are still confused, determine what type of liquid is good for filling the radiator. You can fill it with distilled aqua water added with coolant liquid to keep the water from boiling easily and coat the entire wall so that rust does not arise easily.

So, a brief review of the adverse effects of using mineral water on car radiators that we can review this time. It is expected that those of you who were confused to fill your favorite car radiator water, at this time after reading the reviews above have understood the danger of filling the radiator using mineral water. Hopefully, it will be useful for the reader because if the radiator is not healthy it will affect the comfort of the car itself and make the price of the car go down after resale.

No comments:

Powered by Blogger.